Effectivement manomètre gaz très intéressant et polivalent .Il m'a beaucoup aider pour le dépannage de mes chaudières .

Super!

Fonctionne bien. Seul inconvénient, la notice est en anglais avec des caractères très petits.

Parfait. Fait son travail.

tuyaux trop fins

l'appareil n'a jamais fonctionné. Il a été renvoyé à Amazon et remboursé.

un pour comprendre les fonction des pressions différentielle et pour réglage d'un poil a granuleil manque une notice meme en anglais aller sur le net a vous il ma fallut une demi heure pour comprendre les parametres

simple d'utilisation et rapidedommage peut-être qu'il ne soit pas fournie avec des cônes de plusieurs dimensions afin de pouvoir s'adapter parfaitement aux différentes durites !je recommande tout de même

I needed a back up and this product is perfect for testing, light and easy to use

Ich bin sehr zufrieden , funktioniert einwandfrei

I've got this manometer to measure static pressures in my HVAC system. It is small, but convenient to use. It can measure positive, negative and differential pressures. I have no way to calibrate it right now, so have to trust its readings. Today I have measured 0.43 in H2O total external static pressure in my house, which is pretty good. You can also measure pressure drops over individual system components to find a restriction.I had to buy a couple of probes for the measurements. They are typical bent tubes with small holes near the tip. The diameter of the barbs on the meter is 4.9 mm, very close to the barb size on the probes. The included silicone tubes measure 3 mm ID and 5 mm OD and fit both the meter and the probes just fine. The power comes from three 1.5V AAA cells. I have used rechargeable NiMH cells and they work just fine. For the future I can measure the pressure drop across the air filter to decide when it is the time to replace it. It is a useful tool in every household.04-27-24 update. Today I was able to calibrate (kind of) my gauge against a precision calibrated Heise gauge. I was not able to go below 6 in H2O, but from 6 to 83 in H2O both gauges showed very close numbers. It was not a proper calibration, but it showed that I can trust this gauge. It even generated an overpressure error, when I slightly exceeded 83 in H2O.

Utilizzato per tarare il min/max del gas in uscita dalla valvola boiler, ha funzionato. Il tubicino in dotazione è piccolo e nel mio caso mi sono dovuto ingegnare con un piccolo giunto e spezzone di tubicino adatto alla presa sulla valvola gas. Soddisfatto dell'acquisto.

圧力差をちゃんと測れる。