Le produit multimédia n'a pas pu être chargé.

I used Ai to create instructions from the reviews here... hope this helps. ALL OF THIS IS AT YOUR OWN RISK>>> I DID NOT WRITE THIS>>> I ONLY PUT THE REVIEWS IN AND HAD AI PUT THE INSTRUCTIONS TOGETHER. So doing the things below is 100% at your own risk.Mini Cannon InstructionsIMPORTANT SAFETY WARNING1. 2. 3. 4. 5. This mini cannon is NOT a toy. Only use it if you understand basic firearm safety andpyrotechnics. Misuse can result in injury or property damage.Always wear eye and ear protection while firing.Never point the cannon at people, animals, or anything you don’t intend to shoot.Keep flammable materials away from the cannon during use.Use black powder or substitutes responsibly. Do not exceed the recommended load size.WHAT YOU NEEDBlack Powder:1. 2. Wads:1. Recommended: 4FG (finest grain) for best results.Alternatives: 3FG, Pyrodex P , or carefully ground 2FG into finer grains.Paper towels, toilet paper, or any soft material to act as a wad.Optional Projectiles:1. Small BBs or musket-like balls if desired.Ignition Source:1. Black powder can be ignited directly with a match or lighter. No fuse required, but a fuse can beused for added safety.Cleaning Supplies:1. A small brush or cloth to clean the barrel after use.LOADING YOUR CANNON1. Measure Your Powder:a. the barrel.b. Use 3 to 6 grains of black powder (approximately the size of a small pinch). Do not overfillIf using a projectile, 4.5 grains is optimal to leave space for the wad and projectile.2. Add Powder to the Barrel:a. Pour the measured powder into the barrel.b. Ensure the powder is evenly distributed.3. Insert the Wad:a. Roll a small piece of toilet paper or paper towel into a loose ball.b. Push the wad gently into the barrel until it sits on top of the powder.4. Add the Projectile (Optional):a. b. Place the BB or musket ball on top of the wad.Ensure it fits snugly; if loose, wrap the projectile in a small piece of paper to create atighter fit.FIRING THE CANNON1. Prime the T ouch Hole:a. ignition charge.Sprinkle a small amount of black powder onto and into the touch hole. This acts as the2. Ignite:a. Use a long match, lighter, or fuse to ignite the powder in the touch hole. Expect a delay ofabout 3 seconds if using powder alone.3. Enjoy the Blast:a. Stand back and watch the smoke, fire, and sound! The cannon should produce a satisfying“”popand smoke cloud.CLEANING AFTER USE1. 2. 3. Allow the cannon to cool completely before handling.Use a small brush or cloth to clean out residual powder and debris from the barrel.Wipe down the exterior with a dry cloth to prevent corrosion.TIPS FOR BEST RESULTS1. Black Powder Choices: 4FG or ground Pyrodex works best. Avoid Triple Seven 3FG unless using2. 3. a booster.Safety Distance: Keep at least 12 feet away when firing if using a fuse.Experiment with Loads: Start with smaller powder amounts (e.g., 3 grains) and gradually adjustbased on desired performance.DISCLAIMERSThe manufacturer is not responsible for injuries or damages caused by misuse.This cannon is designed for recreational use only and should never be used for self-defense or to fire atliving beings.Have fun, stay safe, and enjoy the miniature artillery experience!

Etwas für Sammler

Expensive toy but cool 😎 looks great

Está muy bien elaborado, tan solo que requiere una mecha bastante delgada. Es un cañon funcional a parte de que es un bonito adorno, excelente.

It is really small, like the pics show.In your hand it fits , like the add.Need to make a securement device, like a board with screws. Not a lot of recoil but could definitely shoot your eye out... no joke.Use a 22lr case full of 4ffff blackpowder(roughly equivalent of 5 grains .A small pinch of tp to use as a wad to hold the powder and again the ball.Prime using 4ffff powder, won't be able to get viscos fireworks fuse easily in Canada.Light using matchcord, punk, or incense stick ect.